Eddies NASCAR Garage     |   home
click wrench to go back
Bill Elliott 1989 Coors-Ertl
Built by Eddie Bass

For this car I used a ertl 1/18 scale  opening hood thunderbird diecast.
 I first stripped the car down to the bare metal.
The car was then sprayed with gray primer followed by Coors red and gloss white.
The decals went on and are followed by 3 coats of clear.
The rims are painted in gloss gold.
I also have added a pre wired distributor and wired the engine compartment with braided oil & water lines.
Also have added a radio antenna and photo-etched window net.

material list::
Ertl 1/18 t-bird (1991 release)
custom made decals
3m 1000 grit sandpaper