Robbans RC-page ¡¡¡™
 
Inferno mp 5 !!!™
 
The new #1 in 1/8 scale gas.

Everyone who follows 1/8 scale nitro racing knows the Inferno. The 4WD Kyosho buggy practically owns the winner's circle, with first-place trophies from both the 1992 and 1994 IFMAR World Championships. Now another 1/8 scale champion-the Kyosho Inferno MP-5-is revved up and ready for action. Though the name's familiar, much of the engineering has a powerful new edge. Kyosho didn't just load the Inferno with more upgrades. The Inferno MP-5 takes 1/8 scale buggy design to the next level. The shape of the chassis, the angle of the kingpins, harder to bring home the win.





A tradition of gas greats.

Less than ten years ago, one of the biggest challenges in 1/8 scale gas competition was simply finding enough drivers to hold a race. Beginning with the Burns in 1989, Kyosho took the lead in bringing 1/8 scale gas racing to the mainstream. The Inferno MP-5 continues that tradition. Today, thanks to Kyosho, the average racer not only can participate-he stands a very good chance of grabbing the gold.







--------------------------------------------------------------------------------



Re-engineered World Champion brings new advances to the nitro wars.

No other car manufacturer could top the 1/8 scale Turbo Inferno -- so Kyosho did it themselves, with the Inferno MP-5. Much more than a tricked-out Inferno, this new buggy hits new performance highs...including faster speeds, easier handling and greater off-road endurance. There's no other machine like it!



Race-winning refinements:

Look here (*) for areas where Kyosho has achieved new, high standards of competitive performance!



1. Heavy-duty wing stay* Endures rough racing action without bending or breaking.

2. Engine mounted closer to the center of the chassis* Improves lateral, or left-to-right, balance.

3. High-capacity 125cc fuel tank Lid is sealed with a



 
USA1 !!!™
The King of All Monsters, in 4WD Gas and 4WD/4WS Electric Versions!

Kyosho's biggest, most powerful truck is the 4WD 1/8 scale USA-1 Nitro Crusher- source of the hottest speeds, longest run times, and most authentic monster roar! It features a flat-pan aluminum chassis, nylon double wishbones, heavy-duty shaft drive, 3 gear differentials, bronze bushings, 8 oil shocks and more. Requires a .21 rear exhaust engine and 2-channel radio with heavy-duty steering servo.

The powerful 1/10 scale USA-1 Electric 4WD/4WS gets its unstoppable ride from 8 coil-over shocks and a heavy-duty, 4-wheel independent suspension designed for excellent high-speed handling. Twin Mega® 360 truck motors double its power. Also included are metal bushings, a heavy-duty speed control and aluminum shock towers. Requires a 2-channel radio with heavy-duty steering servo, 6-7 cell battery and charger.







--------------------------------------------------------------------------------

SPECIFICATIONS:

USA-1 Electric

Stock Number: KYOC0242

Length: 18.3 in (465 mm)

Width: 15.7 in (400 mm)

Height: 11.8 in (300 mm)

Weight: 8.7 lb (3945 g)

Motor: Twin Mega 360° Monster Truck Motors (included)

Requires: 2-channel radio w/heavy-duty steering servo, 6-7 cell battery & charger



USA-1 Nitro Crusher

Stock Number: KYOC0525

Length: 19.4 in (495 mm)

Width: 16.5 in (420 mm)

Height: 14.8 in (375 mm)

Weight: 9.8 lb (4445 g)

Requires: 2-channel radio w/heavy-duty steering servo & .21 rear exhaust engine



 
Dodge !!!™
Dodge Ram styling, nitro realism and rugged reverse gear!

Nitro powered 4WD with Reverse

Reach new heights in R/C off-road excitement with Kyosho's Dodge Ram nitro truck with Quick Reverse Clutch! With its powerful GS-11X engine and heavy-duty 4WD transmission, this is one truck that's ready to roll over the competition, all the while showing off a sleek Dodge Ram profile. Add oil-filled shocks, ribbed Tracker tires and the exceptional maneuverability of its rugged reverse gear, and you've got a sure-fire winner!



4-wheel, center shaft drive transmission features two gear differentials for smooth, efficient power delivery.





2mm aluminum chassis is designed for rugged off-road action.





4-wheel independent double wishbone suspension works with the oil-filled shocks to absorb bumps and improve handling.





Impact-resistant, clear polycarbonate body offers authentic 1/10 scale Dodge Ram truck styling.





Also available: the original QRC Baja Beetle and a performance boosting 2-Speed Transmission.





--------------------------------------------------------------------------------

SPECIFICATIONS:

Stock Number: KYOC0426

Length: 15.7 in (400 mm)

Width: 11.4 in (290 mm)

Height: 7.8 in (200 mm)

Wheelbase: 10.4 in (264 mm)

Weight: 4.0 lb (2300 g)

Engine: Kyosho GS-11X w/recoil start (included)

Requires: 2-channel radio w/2 servos, glow fuel, glow starter



 
Favourite links
 

my metallica page !!!™
under construction...


cartoon networks homepage !!!™
cool cartoons...


chat !!!™
chat on swedish

Email me on:
[email protected]

This page has been visited times.