BUILDING YOUR COLLECTION: Endurance Style

Endurance Beyblades win by outlasting their opponents. They aren't as aggressive as Attack types, which helps them to conserve their spin power. Free-spinning or thin shafts are the best way to accomplish this.

First priority- start out with:

Dranzer V2- contains 10-balance weight disk and Neo Right MW spin gear
Driger S
Bearing Stinger- contains 1 NSK bearing
Burning Kerberous- contains 10-wide weight disk and 1 removable NSK bearing

Dranzer V2, Driger S and Burning Kerberous are wonderful endurancers by themselves. Bearing Stinger's shaft works with two bearings: a metal one (NSK) and a plastic one. You can replace the plastic one with an NSK bearing from Burning Kerberous, so it'll now have two NSK bearings. This will give it a huge performance boost. 

Try out these configurations:

ATTACK RING: Driger S or Dranzer V2-- see which one suits you better
WEIGHT DISK: 10-wide or 8-balance-- see which one suits you better
SHAFT AND BLADE BASE: Bearing Stinger with 2 NSK bearings or Burning Kerberous-- whichever works best for you

Second priority- aim to get these next:

Auto-Change Balancer
Bistool
Driger V2- contains 10-balance weight disk and Magnetic South Neo Right spin gear
Wolborg- contains 8-balance weight disk and 1 NSK bearing

Get more Endurance from Auto-Change Balancer's base with Off the Chain's First Endurance Technique. This causes it to start out in Endurance mode instead of Attack mode, greatly improving its performance:

1) Remove the Attack Ring 
2) Hold moving part of base with thumb & index finger 
3) Rotate counter-clockwise until the pointy end of the base comes out
4) Replace Attack Ring 
5) Slightly rotate Attack Ring so the launcher can be inserted

Once you've done that, you can try out these configurations:

ATTACK RING: Auto-Change Balancer, Driger S, Bistool, Dranzer V2 or Wolborg-- whichever works best for you
WEIGHT DISK: 10-balance or 10-wide-- see which one suits you better
BLADE BASE: Auto-Change Balancer in First Endurance mode

  Driger V2 and Wolborg are powerful enough uncustomized. Also experiment with these:

ATTACK RING: Auto-Change Balancer, Dranzer V2, Driger S, Bistool, Driger V2 or Wolborg-- whichever works best for you
WEIGHT DISK: 10-balance or 10-wide-- see which one suits you better
SPIN GEAR: Magnetic South Neo Right or Neo Right MW spin gear-- see which one suits you better
BLADE BASE: Driger V2
SUPPORT PARTS: Dranzer V2 

ATTACK RING: Auto-Change Balancer, Bistool, Driger V2 or Wolborg-- whichever works best for you
WEIGHT DISK: 10-balance or 10-wide-- see which one suits you better
SHAFT AND BLADE BASE: Bearing Stinger with 2 NSK bearings or Burning Kerberous-- whichever works best for you

ATTACK RING: Auto-Change Balancer, Bistool, Dranzer V2, Driger S or Driger V2
WEIGHT DISK: 10-balance or 10-wide-- see which one suits you better
SHAFT AND BLADE BASE: Wolborg

ATTACK RING: Bistool, Dranzer V2 or Driger V2-- whichever works best for you
WEIGHT DISK: 10-balance or 10-wide-- see which one suits you better
SPIN GEAR (if not using Bearing Stinger, Burning Kerberous or Wolborg blade base): Magnetic South Neo Right or Neo Right MW spin gear-- see which one suits you better
BLADE BASE: Driger S, Bearing Stinger with 2 NSK bearings, Wolborg, Burning Kerberous or Driger V2-- whichever works best for you

Here's a way to turn Bistool into a simple combo with wonderfully well-rounded Attack, Defense and Endurance:

ATTACK RING: Bistool
WEIGHT DISK: 10-balance
BLADE BASE: Bistool

After you get the important stuff, you may also want to try these:

Dranzer S
Metal Draciel or Master Dranzer (the bases of these two blades are the same)
Metal Dranzer- contains 10-balance weight disk, Magnetic South Neo Right spin gear 

Dranzer S' blade base packs fairly good Defense as well as Endurance. To increase its performance, replace the bearing in its shaft with an NSK bearing from Bearing Stinger, Burning Kerberous or Wolborg. You can then combine the base with parts from your other blades (try Metal Dranzer's Attack Ring for a strong smash attack that doesn't lose Endurance easily):

ATTACK RING: Auto-Change Balancer, Bistool, Dranzer S, Dranzer V2, Driger S, Driger V2, Metal Dranzer or Wolborg-- whichever works best for you
WEIGHT DISK: 10-balance or 8-heavy-- see which one suits you better
SHAFT AND BLADE BASE: Dranzer S with NSK bearing

The same thing goes for Metal Draciel's or Master Dranzer's blade base. Since Metal Draciel's and Master Dranzer's Attack Rings are fragile and ineffective, top off the blade base with parts from the other blades in your collection:

ATTACK RING: Auto-Change Balancer, Bistool, Dranzer S, Dranzer V2, Driger S, Driger V2, Metal Dranzer or Wolborg-- whichever works best for you
WEIGHT DISK: 10-balance or 8-heavy-- see which one suits you better
SPIN GEAR: Magnetic South Neo Right or Neo Right MW spin gear-- see which one suits you better
BLADE BASE: Metal Draciel or Master Dranzer

Experiment on your own to find other combos that suit you. If you've got the time and money, and you think you need more blades, now's the time to get them since you already have the most vital ones. Have fun, and good luck blading!


Back to previous section