  |
|
|
|
|
 |
 
|
  |
We offer the highest quality of CAD/CAM/CAE Engineering services on SUN and NT workstations applying over 20-years experience from AIRCRAFT and AUTOMOTIVE industry.
|
|
|
Our knowledge - experience was acquired at Aircraft Industry SOKO Mostar - Bosnia and Herzegovina - former Yugoslavia through the manufacturing of assemblies / components / tools of former Yugoslavia military airplanes and helicopters : ORAO, G4, LASTA , GAZELA - French license, as well as rotorcrafts and commercial airplanes in cooperation with worldwide known aircraft producers : BOEING, MDD, AEROSPATIALE- Superpuma Sponson project as the last one, AIRBUS - fuselage central section of 330/340 project as the last one, MBB, DORNIER, etc. and at C - TECH HandelsgmbH Vienna - Austria and in-house through CAD/CAM cooperation- injection molding tools ( plastic components ) for the automotive industry ( AUDI, VW, etc. ) with H. WEIDMANN AG Plastics Division from Rapperswil in Switzerland - world known producer of plastic components.
|
 |
Ccs-TECH, Ltd. was founded in Mostar- Bosnia and Herzegovina in July of 1996 and is fully owned by Mr. Salko Durakovic B. Sc. Mech. Eng. who was employed at Aircraft Industry SOKO Mostar until the war in Bosnia and Herzegovina ( 1992 ).
|
|
Since January 1997 Ccs-TECH, Ltd. is the authorized distributor of C - Solutions , Inc. ( Boulder , Colorado - USA ) / C - TECH HgmbH ( Vienna - AUSTRIA ) product - CAD/CAM/CAE software ( GMSWorks ) for the market of Bosnia and Herzegovina.
|
|
Note : If you prefer frames click here !
|
Copyright © 1996-2001 Ccs-TECH , Ltd. All rights reserved
Last modified : January 8 , 2001
|