AIM:
To complete second solo.

OBJECTIVE:
Review previous lessons, and safely conduct second solo.

CONTENTS:
1 - Pre Flight Briefing
2 - Review the following:
 (a) Take off and standard departure procedures
 (b) climbs and climbing turns - while maintaining visual and instrument     reference.
 (c) Manouvering at minimum control airspeed - while maintaining visual and   ` instrument reference.
 (d) Power off stalls (imminent and full) - while maintaining visual and instrument    reference.
 (e) Advanced emergency landings
 (f) Circuits
 (g) Recovery from poor approaches and landings
3 - Introduction to :
 (a) Second solo in the circuit
4 - Post Flight briefing

METHOD:
Instructor conducts brief discussion with the student covering the previous flight and the success of the previous solo. The student performs a “walk around”and “pre flight inspection” of the aircraft.  The student performs the start up procedures and radio calls, followed by take off and standard departure procedures. Once in the circuit, the instructor will then review the student’s performance at circuit procedures and emergency procedures in the circuit (over approximately 3 circuits).  Then the instructor has the student land.  Upon landing, the instructor disembarks from the aircraft after instructing the student to perform  3 complete circuits.  After completion of the 3 circuits, the student will land, finishing with parking and shut down procedures.  The flight will be completed with a post flight review briefing and a preview of the lesson to come.

EVALUATION:
This flight is considered successful if at it’s completion :
- The student is alive
- The aircraft is undamaged and uncrashed.
- The student has completed the assigned number (3) of solo circuits.