The Image Program is used to backup Disks.
It can not be used to create images for network booting.

The Files in this ZIP should be all you need to get things rolling.

Changes you need to make.

a) Copy your KTC2000 .com drive to a:\nwclient
b) edit a:\nwclient\startnet.bat  and replace ne2000 with KTC2000
c) edit a:\nwclient\net.cfg  in the same way including IRQ & ADDR

or see if the default NE2000 driver will work
( is a KTC2000 card NE2000 compatable ? )

Good Luck , Josh

