|
HIGH FREQUENCY WELDED PIPES EX NMPP MILL No.111
min quantity 40 Mtons
Welded circular unalloyed steel tubes subject to special requirements;
technical delivery conditions acc. to DIN 1626, API 5L, ASTM A53 or COST standards.
Normal carbon steel Grades are available in DIN, API (B, X42) or GOST
SHAPE SECTION (square tubes)
SIZES mm |
Wall Thickness mm |
Standarts |
| 20.0 x 20.0 |
1.5 |
GOST 13663-86
8639-82
8645-68
3262-75 |
| 25.0 x 28.0 |
1.4 - 3.0 |
| 40.0 x 25.0 |
1.4 - 3.0 |
| 40.0 x 28.0 |
1.4 - 3.0 |
| 40.0 x 40.0 |
1.4 - 3.0 |
| 50.0 x 25.0 |
1.4 - 3.0 |
| 60.0 x 30.0 |
1.4 - 3.0 |
ROUND SECTION (round
tubes)
|
Outside diameter |
Wall Thickness |
API Monogram |
Notes |
Price $USA |
| 1/2" (21.3 m) |
2-4 mm |
Available by end
of 1999 |
- length up to 12 meter long; |
180-210$ |
| 3/4" (26.7 m) |
2-4 mm |
- ends plain and square cut; |
1" (33.4 mm) |
2-4 mm |
- outside weld seam always removed, |
| 1 1/4" (42.2 m) |
2-4 mm |
inside weld seam can be removed on request for
size O.D. 50 mm or above; |
| 1 1/2”(48.3mm) |
2-4 mm |
standard mill rust protection slightly oiled; |
2" (60.3 mm) |
2-4 mm |
|
| 2 1/2”(73.0mm) |
2-4 mm |
- ends capped on requested; |
3” (88.9 mm) |
2-4 mm |
- heat treatment /normalizing can be done on
requested; |
4" (114.3 mm) |
2-5 mm |
- hydrostatic test on up to 9.3 meter length |
HIGH FREQUENCY WELDED PIPES EX NMPP MILL NO.11.
min quantity 40 Mtons
Welded circular unalloyed steel tubes subject to special requirements;
technical delivery conditions to DIN,API 5L, ASTM, A53/A335/A252 or several COST
standards.
Normal carbon steel Grades are available in DIN, API (B - X56) or GOST
Outside diameter |
Wall Thickness |
API Monogram |
Notes |
Price $USA |
6" (168.3 mm) |
4-7 mm |
Present |
- length 6 meter 18 meter long; - beveled ends
and ends plain and square cut as requested; |
210 –270$ |
8" (219.1 mm) |
5-8 mm |
Present |
- outside & inside weld seam
always removed; |
10" (273.0 mm) |
5-8 mm |
Present |
12" (323.9 mm) |
6-9 mm |
Present |
- standard rust protection black bitumen lacquer / clear
lacquer; |
16" (406.4 mm) |
7-10 mm |
Available in 3rd quarter of
1999 |
- ends capped on requested; - heat treatment/normalizing
can be done on requested; |
530 mm |
8-12 mm |
GOST only |
-hydrostatic test on up to 18 meter length; |
If you are interested by other production inform me please.
Allow me to inform you on change of our prices
Fax: +38 056 721-1565 E-mail: [email protected]
Fax +1 209-391-9105
| 
