Features Turntable Plan Cross Section Residential Specifications Installation Gallery Benefits Carousel Vehicle Turntables   Michael.S.Hollands, Mailing Address: PO Box 51818, Pakaranga Auckland N.Z.  Phone: 09-576-6057 Mobile:(025)977-274 Fax:09-576-6057 Ian Webb, Mailing Address: 24 Rata St, Auckland N.Z. Phone: 09-827-4583 Mobile:(025)931184

Specifications - Standard model Design Certificate: Manufactured to NZS 3404, 4203 & AS 1250

Technical Specifications:

Loading: At any point - 9 kn  
Overall load capacity - 4 Ton  
Load capacity at edge - 9 kn per wheel

Construction: Base Plate size - 1200mm x 1 200mm welded from 127mm x 64mm RHS steel  
Finish - Hot dipped galv. or 2 pot epoxy paint  
Bearing capacity - 10 ton (minimum)  
Decking - Laminated treated Australian hardwood or NZ Radiata  
Steel tred plate or other

Dimensions: Diameter - 4000mm  
Depth - 400 mm Variable see installation detail

Unique Feature: The Turntable can be angled to 20 degrees (special drive equipment required) on slopes. Support can be given by either

1. A single tanalised pole 250mm S.E.D.
2. Multi pole platform
3. 150mm reinforced concrete slab

General: Site preparation - Responsibility of the purchaser. Full advice given.

Location - Suitable for interior and exterior use.

Packaging and freighting - to ensure easy transportation, the CAROUSEL is supplied completely prefabricated and fits on one 2400 x 1200 x 750mm panel. Gross weight one ton.