Installation de encarta atlas 99 sur le disque dur. (english text below)
--------------------------------------------------

1. copier fakecd.exe dans C:\

2. choisir une lettre de lecteur libre, dans cet exemple I:

3. ajouter la ligne suivante  la fin de Autoexec.bat:
   fakecd c:\cd-rom /l:I
   soit attribuer  c:\encarta la lettre de lecteur CD I:\

4. crer le dossier c:\cd-rom

5. copier le contenu DES DEUX CD encarta directement dans ce dossier, ne pas
   crer de sous-dossiers spars pour les 2 CD.
   (les recoupements de fichiers ne posent pas problme)

6. redmarrer. Vrifier dans le poste de travail que le disque
   I: est bien prsent, et a l'icne d'un lecteur CD (ou de l'encyclopdie
   Encarta).

7. lancer l'installation depuis le poste de travail, disque I:
   ET NON PAS DEPUIS C:\cd-rom ! C'est le mme rpertoire certes, mais cela
   fait toute la diffrence pour leurrer l'installeur !

8. A la fin de l'installation, aprs le redmarrage, il faut
   corriger certains lments du registre:
   HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft Reference\EVG\99
   il faut vider CDVolumeName et CD2VolumeName qui deviennent donc ""
   (le cas chant, mettre le nom de volume du disque dur !)

9. HKEY_CURRENT_USER\Software\Microsoft\Microsoft Reference\BookshelfF\96L\Options
   mettre Drive "I:\"

8. et 9. sont raliss automatiquement par le fichier encarta.reg ci-inclus.
   Attention: ne l'utiliser que si le disque d'installation est I:\, et si
   votre disque dur n'a pas de nom de volume ! Sinon, ditez ce fichier dans
   le Notepad pour y entrer vos valeurs !

10. Lancer Encarta... enjoy !  This is a PCST solution... (c)-1998 PCST
    www.bigfoot.com/~pcst

11. Une fois que tout fonctionne bien, je vous recommande de dplacer (ou supprimer) 
    les 4 fichiers suivants:
      I:\autorun.ini, I:\autorun.inf, I:\autorun.ico, I:\autorun.exe
    Cela supprime l'icne Encarta du disque I:\ dans le poste de travail.

12. Problmes connus

   1.Si le programme continue d'afficher "veuillez introduire le CD-ROM", il faut supprimer
     le nom de volume du disque dur qui abrite le disque I:
     Poste de travail, clic droit sur le disque dur, proprits, Nom de Volume, vider la fentre.
     Remarque: vous pouvez conserver le nom de volume, mais il faut diter le fichier encarta.reg 
     et entrer le nom de volume sous "CD2VolumeName"="" et "CDVolumeName"="", et le rexcuter.

   2.Durant l'installation de l'atlas, le disque I: doit se trouver sur le mme disque dur (ou la  
     mme partition) que le disque sur lequel l'atlas est install (C: par dfaut). Si ce n'est pas 
     le cas, vous verrez un message d'erreur. Aprs l'installation, vous pourrez sans autre dplacer
     le disque I: sur un autre disque dur (ou une autre partition) en indiquant la nouvelle adresse
     dans la ligne fakecd de autoexec.bat. Il faut redmarrer aprs cette modification.

   3.Quand tout fonctionne, vous pouvez ajouter > nul  la fin de la ligne fakecd 
     (fakecd c:\dc-rom /l:I > nul). Ceci empche l'affichage de mise en route de fakecd.

   4.Il est indipensable de supprimer cette ligne avant d'installer (ou de rinstaller) Windows.

   5.www.bigfoot.com/~pcst pour d'ventuelles mises  jour !

How to install Encarta Atlas 99 directly from your DD
-----------------------------------------------------

1. copy fakecd.exe on your hard drive (C:\)

2. choose a free drive letter (I:\ in this example)

3. add the following line to Autoexec.bat
   fakecd c:\cd-rom /l:I
   (attrib. the CD drive letter I:\ to c:\cd-rom )

4. create the directory c:\encarta

5. copy the content of both CD directly into this directory, without creating
   separate subdirectories (redundant files and directories are not a problem).

6. reboot. check in My Computer that the drive I:\ is present, and that it
   appears as a CD (or with the encarta icon).

7. run the setup exe. from My Computer, disk I:\ AND NOT FROM C:\cd-rom.
   Of course it's the same directory, but it makes all the difference for the installer !

8. After installing, after you've rebooted, you'll need to make some changes
   to the registry:
   HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft Reference\EVG\99
   you must empty CDVolumeName and CD2VolumeName that become ""
   (if it does apply, enter the volume name of your Hard Disk !)

9. HKEY_CURRENT_USER\Software\Microsoft\Microsoft Reference\BookshelfF\96L\Options
   enter Drive "I:\"

8. and 9. are made automatically by the file encarta.reg (included in this pack).
   Attention: do only use it if you use the drive I:\ as fake CD, like in this example,
   and if your hard disk has no volume name ! If not, please edit this file with
   Notepad.exe to introduce your values before to launch it !

10. Launch Encarta... and enjoy !  This is a PCST solution... (c)-1998 PCST
    www.bigfoot.com/~pcst

11. When you're finished and you are sure that everything works fine, I recommand
    to move (or delete) the following four files: 
      I:\autorun.ini, I:\autorun.inf, I:\autorun.ico, I:\autorun.exe
    This prevents the icon of the I: drive in My Computer to appear with 
    the encarta icon.

12. Troubleshooting

    1.If the program still displays something like "Please insert the disk in the drive", you should
      remove the volume label of the hard drive containing the I: drive.
      My computer, right click on the drive, properties, volume label, empty this window.
      REM: it's possible to keep the volume name, but you need to edit the file encarta.reg
      for this: add the volume name under "CD2VolumeName"="" and "CDVolumeName"="" and launch it
      again.

   2.While installing the atlas, the I: drive must be found on the same hard disk (or partition)
     than the disk on which you install the atlas (default is C:). If not, an error message is
     displayed. After installing, you can move it without problem to another drive (or partition), 
     by indicating the new location in the fakecd line in autoexec.bat. The computer must be 
     restarted after this modification.

   3.You got it, everything works fine now... You can retain fakecd to indicate that it's starting
     by adding > nul at the end of the fakecd line (fakecd c:\encarta /l:I > nul).

   4.It's absolutely necessary to remove this line from autoexec.bat before to install (or 
     reinstall) Windows.

  5.Check www.bigfoot.com/~pcst for updates !