Sharp Zaurus Add-on Software Installer
1/22/96

Overview

When installing Zaurus add-on software to a flash card, it has been
necessary to have a significant amount of main memory available before
you could install to the flash card. For users with a large amount of 
data in their Zaurus, this meant backing up their data to their PC or 
a flash card, clearing the unit, installing the add-on software, and 
then restoring their data. This could be a rather time consuming process.

This new version of the Sharp Zaurus Add-on Software Installer allows you
to install Zaurus add-on software directly to a flash card with only a 
small amount of main memory available, generally eliminating the need to
go through the process described above.

Use

To use the new installer with any add-on software you may already have
(or purchase in the near future, since current dealer stock may have an 
older installer), simply copy INSTALL.EXE and FLASINST.DAT to your add-on 
software diskette and then perform a normal installation. INSTALL.EXE will 
overwrite the old INSTALL.EXE (FLASINST.DAT is new). We strongly suggest 
you make a backup copy of the original add-on software diskette and copy 
the new installer files to the backup copy (and install the add-on software 
from the backup copy of course). If the installer on the add-on software
diskette is newer (later date) than this version of the installer, DO NOT
overwrite it.

Support

If you experience any problems with the new installer, please call Sharp
Customer Assistance at 1-800-BE-SHARP.
