|
The new Grove Manlift VM Series work platforms feature vertical masts similar to the ones founf on fork lifts combines with an articulating arm for up-and-over reach capabilities. Compact dimensions, limited tailswing and pivotal-type steering that
results in zero turning radius make these unique electric-powered units
ideal for use in confined areas such as industrial rack aisles and warehouse
storage areas.
|
Elevation System
All-steel fork truck mast type with articulating jib. |
|
Platform All welded aluminium work platform with sliding bar gate. Standard 110-V
AC wiring with GFI (ground fault interrupter) and control foot pedal.
|
Power Plant
4 HP electric motor powered by 448 amp/hour and 570 amp/hour traction batteries. 2-section positive displacement gear pump. |
|
Platform Controls Full pressure hydraulic controls with multi-axis joysticks for drive/steer,
mast lift/swing, and jib lift.
|
Drive/Steer
Hydraulic drive motors mounted on the front wheels. 90 degrees pivotal steering on the front wheels. |
 |
The platform-mounted control box includes easy to operate full pressure hydraulic controls, a battery indicator and bourmeter. 110-V AC power to the platoform is standard along with a control foot pedal. Lower controls are conveniently located on the side of the machine. |
 |
Overall width is just 39 in and 48 in. Instowed positions, the overall height is just 6 ft 7 in, alowing them to easily fit through standard double doorways. |
This
page was created with Netscape Composer.