Elk River, Inc.
combining modern technology with old fashioned values®
 
 
Web Lanyards
 
Web Lanyards are normally available in one inch wide nylon. A nylon web lanyard will not meet the 900 pound shock load requirement unless used in conjunction with a Zorber Shock Absorber.  Care should be taken with any lanyard to make sure it is not subject to abrasion or cutting. If there is a possibility of abrasion or cutting, a tie-off anchorage sling should be used. The tie-off point with any lanyard should be at least shoulder height. When lanyards are being used in a tether situation, care must be used in determining the complete area of possible movement. 
 
 
 
 Equipment Engineering HomePage
 
For any enquires, contact us at [email protected]
 
 
 Netscape Now!This page was created with Netscape Composer.
 
This page last updated on 1st November, 1998.
 
Copyright © 1996 Netscape Communications Corporation
Company & product names are trademarks, registered tradmarks and copyright of their respective holders and are used only for purposes of identification