Service Set-To Torques should be used when assembling components.
Service In-Use Recheck Torques should be used for checking a pre-torqued item.
| Service Set-To Torque |
Service In-Use Recheck Torque |
|
| Backup Lamp Switch | 18 | 15-20 |
| Drain Plug | 15 | 10-20 |
| Fill Plug | 15 | 10-20 |
| Front Bearing Cap Bolt | 33 | 30-36 |
| Shift Control Housing-to-Case Bolt | 22 | 20-25 |
| Transfer Case Drive Gear Locknut | 150 | 145-155 |
| Transfer Case-to-Transmission Case Bolts |
30 | 25-35 |
| TCS Switch | 18 | 15-20 |
All Torque values given in foot-pounds with dry fits unless otherwise specified.