wpe7.jpg (82943 bytes)

All models: P filter cartridge system for breathing air quality according to DIN 3188.MP..-KAP180 "B" and "D" models are equipped with 3 m long intake hose and pre-filter.
1) Also available with 225/330 bar switch-over device = HU models (e.g. KAP180-20 E-H U)
2) Electric motor models "E" = 380 V, petrol engine models "B" = Honda engine, "BA" and "DA" models with electric
starter and 12 V battery (e.g. KAP14-7,5 BA) = option, diesel engine "D" = diesel engine with hand crank start

MP..to KAP 180:     STANDARD:  filling assembly = filling hose 1 m, filling valve with automatic venting, German fill-
                                                        ing adaptor G 5/8" according to DIN 477, international filling yoke (only for 225 bar
                                                       units), final pressure gauge.
                                                       MP.. models = with 2, KAP14 = with 3, KAP15 + KAP180 = with 4 filling assemblies
                                Option:            COMP-TRONIC electronic control
                                                       automatic condensate drain
                                                       SECURUS filter monitoring system
KAP 220+ KAP 23: STANDARD:  cartridge filter system is not built onto the unit, but is in panel form for separate
                                                         wall mounting
                                                         SECURUS filter monitoring system
                                                         automatic condensate drain with start unloading
                                                         cycle counter to determine the pressure change in the final separator
                                                       

                                   Option:             COMP-TRONIC electronic control
                                                          units: without integrated filling assembly
                                                          bottle filling by external filling assembly

For all models with COMP-TRONIC: cycle counter is standard to determine the pressure change in the final separator

 

* MP...-KAP180: bottle fillings from O - 200 bar KAP 220 + KAP 23: measured with gas flow meter at 200 barFor further information: please ask for brochure AT-E. For "Super-Silent" units see VERTICUS range, for larger units see industrial units -
IKL-E brochure.To check air quality: AIRLAB IV, please ask for a brochure