BO-27

BODY - Moulding

<<previous

next>>

2.  REMOVE ROOF DRIP SIDE FINISH FRONT MOULDING
(w/   T-bar Roof)
Remove four screws and the moulding. 
(w/o T-bar Roof)
Remove eight screws and the moulding.

3.  REMOVE ROOF SIDE WEATHERSTRIP REAR RETAINER
Remove three screws and the retainer. 
INSTALLATION

1.  INSTALL ROOF SIDE WEATHERSTRIP REAR RETAINER
Install the retainer with three screws.

2.  INSTALL ROOF DRIP SIDE FINISH FRONT MOULDING
(w/   T-bar Roof)
Install the moulding with four screws. 
(w/o T-bar Roof)
Install the moulding with eight screws.

 
3.  CLEAN BODY
Wipe off any adhesive left on the body with cleaner.

 

4.  INSTALL COWL LOUVER
(a)  Install the seal to the weatherstrip as shown.
(b)  Install the weatherstrip to the moulding and the retainer.
(c)  Install four clips.