1967 Chevy Camaro
NHRA Super Comp Certified May 1995 Serial #G001578
Engine: Chevrolet LS7 454 Hi-Performance
13.5:1 TRW .060 Pistons
Plasma Moly rings
HD 7/16" Bolt-type rods
Nitrite hardened crankshaft
.020 mains / .020 rods
Sommers Bros. timing gear cover and set - degreeable
High volume oil pump
HD steel oil pump shaft
Moroso oil pan
New cast iron heads - Tuliped HP valve job for increased flow
Stainless steel, single piece, swirl-polished undercut stem valves
(2.300 Int/2.10 Exh)
Pair of LS7 bare aluminum heads included
Moroso degreed harmonic balancer
Edelbrock Elite valve covers
SFI approved flexplate
Hilborn fuel injection system
Mallory magneto
Engine is internally balanced with Mallory metal
Hooker headers 2 �" tube with valve cover evacuators

Crane roller valvetrain package:
Camshaft: Series & Grind #R-284/456-S1-10 Part #13859>
Lifters: Part #13542-16
Valve Springs: Valasco Triple
Retainers: Part #99955-16
Stem Locks: Part #99098-1
Pushrods: Part #13634-8 and #13640-8
Rocker Arms: GoldRace Extruded
Valvetrain Stabilizers: Part #13602-1
(includes adjustable nuts- Int: #99809- Exh: #99810)

Transmission and suspension:
Turbo 400 with transbrake
6000 RPM stall converter
B&M Pro Shifter
Trans blanket
Trans safety bell
HD Driveshaft with safety straps
Dana 60 rear-end with 4.68 gears
Morrison wheelie bars
4-link Alston suspension
Morrison coil-over shocks
Alston 1995 chassis - professionally welded at Alston in their jig
Mustang II rack and pinion front suspension

All new Centerline wheels
All new Goodyear tires
Fiberglass front wrap, hood and trunk lid
Full aluminum Alston Interior Package
Autometer Pro Tachometer
Autometer Engine Temp and Oil Pressure gauges
Simpson parachute
Simpson fuel cell
Rear trunk-mounted battery with shut-off
5-point safety harness
Can be set up for manual transmission - pedals are in place
Funny Car safety roll cage
Painted in Mother-of-Pearl ready for lettering
Less than 20 passes
Estimated horsepower: 1100+
9-second quarters at 170mph


More information can be obtained by e-mail request. Just click on the "E-Mail Me" button, and we will answer promptly. Or, if you prefer, you can call us directly.