Windows 9x
----------
Although Turbo can only be used in true DOS to switch between emulated turbo
and normal operating speed it is possible to to run Windows 95/98 in emulated
turbo mode by pressing F8 at boot and selecting: "Command prompt only" from 
the menu to enter true DOS mode. Switch to emulated Turbo mode and type WIN
to enter Windows 95/98.


CoCo & Dragon Emulation
-----------------------
Turbo works really well with Jeff Vavasour's excellent CoCo II Emulator v1.5
which can also be found on my website. Jeff's CoCo Emulator is a really good
emulator but it runs far too fast on modern PC's. I recommend running Turbo
from a batch file just before running the CoCo emulator to switch to emulated
"Turbo off" mode and then again on exit from the emulator to return the PC to
normal operating speed on exit from the emulator.

e.g.

TURBO OFF
COCO.EXE
TURBO ON


Important Notes:
----------------
Turbo.com is NOT a TSR and if the computer is in Emulated Turbo Mode it will
always return to normal operating speed when the computer is switched off/on
or reset. This program has been properly tested on many different PC's from
a 486 DX2-66 to A Pentium III 600 and has so far worked perfectly on all of
them. A list of these systems is listed below.


Intel 486 DX2-66
Intel 486 DX4-100
Intel Pentium 75/120/133
Intel Pentium 166 MMX/200 MMX
Intel Pentium II 350/400/450
Intel Pentium III 500/550/600
Cyrix/IBM PR200 MX/PR300 MII/PR333 MII
AMD K6-2 200/400/450
AMD Athlon 500




Stephen J Woolham

SJWoolham@Hotmail.com

Internet:

http://www.fortunecity.com/skyscraper/disk/162/

http://www.geocities.com/ukdragon32/

http://www.dragon32.cjb.net

http://welcome.to/dragon32
