     this file was made with:
 ͻ ͻ ͻͻͻͻ ͻ  ͻ   ͻͻͻͻ
  ͻ     Ȼ ɼ ͼ ɼ   Ȼ ɼ   Ȼ ɼ ͻ  ͻ  ͻ Ȼ
                  ȼ ɼ     ͻ       ͼ   Ȼ 
   ɼ              ͻȻ             ͻ ɼ    
  ͼ  Ȼ ͼ ɼ Ȼ ͻ       ͼ ͼ   ͼ    Ȼ ͼ 
 ͼͼͼͼͼ ͼ   ͼ ͼͼ ͼͼ

        <arrows> move right or left on the line you are editing.

  EDIT KEY = <Home>  Begin Editing the Line on the bottom of the display.
                     (The Bottom Line on view area)  This is the main
                     editing function. Once you are done editing a line,
                     press <Enter>, and your new line is displayed on the
                     screen as you have edited it.  You can then continue
                     with further editing.
                 NOTE:  You may NOT edit a line past the "Total lines"
                  in file number at the bottom of the page.
                  (see "+" command and "End" commands below)

  special  =    <Tab>   We set up the editor so you have to edit the last
  editing               line of the display.        Press "Tab"
                      and you will be able to enter the line number that
                      you want to edit.  You may enter 1-21. This works
                      exactly like the <Home> Key editing but puts the
                      edit line up higher on the screen.  Note: to delete
                      any full lines, see (-) command below.

                <End>   Add's one blank line to the end of your file.
                        Watch the (Number of Lines) message in the bottom
                      portion of the screen.  It will increase as lines
                      are added.

                <+>     (Shift +) add a blank line wherever you want it.
                        Insert a line between any of your existing lines.
                <->     Remove any line number from your documents.
                        This option allows you to delete any line.
                <Enter> Save Edited Line. (Hit Enter when your done)
                        Pressing enter will save your changes and allow
                        you to continue editing.
                <Insert>  Insert key toggles between insert and overwrite.
                        insert will insert your text... otherwise you may
                        type over current text shown.
                        (Insert key works only while editing a line)
                <Back>  Backspace is used in your edit line to backspace
                        to any location. Outside of the Line edit, it
                        will bring up a Map of Editor input keys.
                <PgUp>  Flip up one page in your document.
                <PgDn>  Down one page.
                <Del>   Delete one space at a time. (while editing a line)
                <Esc>   Escape key takes you out of Edit mode.
