MY GEAR | |||||||||||||||||
| Basses: | |||||||||||||||||
|
I am Currently Using 2 Different Basses which I have listed below. On Both I am Using Rotosound Strings Gauged at .100, .80, .60, .40. I Modified Both Basses By Having WB500 P/J Pick-ups Installed As Well As A Pick-up Controlling Toggle Instead Of A Knob 1. 1997, Transparent Blue, Washburn XB200 Bantam Bass 2. 1997, Black, Washburn XB200 Bantam Bass | ||||||||||||||||
| Effects: | |||||||||||||||||
|
I Am Currently Using The Following 2 Signal Processors In Line. (Modifications, If Any, Are Noted After Each Item) 1. Tech21, SansAmp Bass Di Driver (I Modified This Slightly By Replacing The Factory Installed Sovtek 7025/12AX7A Tube with a Sovtek 7025/12AX7WB High Gain, Hush Tube) 2. Peavey, T.B. Raxx, All Tube Bass Pre-Amp (I Modified This Slightly By Replacing The 2 Factory Installed Peavey 7025/12AT7A Tubes with 2 Sovtek 7025/12AX7WB High gain, Hush Tubes) | ||||||||||||||||
| Amp Set-Up: | |||||||||||||||||
|
I am Currently Running The Above Signal Processors Into The Following Amp Set-Up (Modifications, If Any, Are Noted After Each Item) 1. Hartke 3500 Bass Head (I Modified This Slightly By Replacing The Factory Installed Sovtek 7025/12AX7A Tube In The Pre-Amp Section With A Sovtek 7025/12AX7WB High Gain, Hush Tube) 2. (2) Hartke 410XL Bass Speaker Cabinets | ||||||||||||||||
| |||||||||||||||||
|
This page has been visited
|