|
I joined Ericsson in March of 1997,as a System Engineer
for the Customer Access Network - Optical Fiber (CAN-OF)
Project for PT. TELKOM Indonesia in Jakarta. This US$100 milion project
install 270,000 lines of fiber access using both Passive Optical Network
(PON) and Active (SDH) Fiber Optic Ring Network Architectures wiithin 14
exchange areas throughout Jakarta. As of April 1998, I designed
for 5 exchanges of over than 140,000 lines. Most significantly,
that did the highest number of 64kB lines.
|
Ericsson
as
a Network Design Engineer
|
PT. Multipolar Corporation ( MPC )
Customer Service Centre
|
Prior to joining Ericsson, I was a Customer Engineer
with a newly established System Engineering
Services
Division of PT. Multipolar Corp
I served as Customer Engineer for the customer mostly Bank. I prepare
the network system platform for the new branch of those bank for
both of Netware Platform and AS/400 (IBM).
|
|
Prior to beginning in Information and Technology career,
I gained a Training Staff, test engineer with an independent
automotive spare part company of PT.Nippondenso Incl. These assignment
included : Service Department , where I served as an Instructor to traine
about Car Aircondition, Motor Starter, Spark Plug, CDI, Alternator
and EFI for the new employee of this company and mechanic of
Car maker , I should prepare the coolingdown test data for new car and
did design or redesign of Car Aircondition.
|
PT. Nippondenso Indonesia Incl. ( NDI
)
Suzuki Futura Aircon Project 1991
|
