OneStop Plumber's Wrench
*PATENT PENDING
Be The First To Buy The HOTTEST Tool Out There!.
[email protected]
877-478-5770

It works like this:
OneStop Plumber's Wrench
Wrench #2 is withdrawn from Wrench #1 for use...
OneStop Plumber's Wrench
The lug of Wrench #2 is inserted into the riser mouth of the angle stop to hold it in place...
OneStop Plumber's Wrench
Wrench #1 tightens the back compression nut while wrench #2 is used to hold the angle stop at the optimum angle for later insertion of the supply tube. No more guessing at the correct angle while on your back in a dark confined cabinet...
OneStop Plumber's Wrench
The open end 12 point box line wrench is designed to slip over the supply tube and drop onto the riser compression nut. It can grasp the nut at twice as many angles as a crescent or open end wrench. No more “rolling” your crescent or open end wrench to get a grip...
OneStop Plumber's Wrench
The inset wrench allows you to grasp the narrow shoulder of a 3/8” compression coupling or Delta tube. The 12 point is then handy to tighten the compression nut.

and more...


O'Kay Specialties
1109 Sawgrass
Normal, Illinois 61761 USA
877-478-5770
FAX 309-662-5643

LIFETIME WARRANTY!!

If you are interested
in becoming a dealer for
your area inquire here

Dealers Only

The OneStop wrench is available in the two sizes most common to angle stops:

3/8" x 5/8" and 1/2 x 5/8"

“OneStop” wrench is a compound tool which takes the place of 4 tools!! It is less expensive, smaller and lighter than the clumsy automotive tools presently used for plumbing purposes. One Stop provides all of the exact size surface wrenches needed for angle stop & compression fitting installation in one compact unit the size of 1 open end wrench. The unique design eliminates surface scratches and "wrench marks". It’s also much quicker and easier to use- some say twice as fast!

Plumbers are finding new uses for The “OneStop” wrench every day!

* Tightening dishwasher supply ftg- ONLY wrench that works well

* ANY FTG that uses the common 3/8 OD compression nut.

* The slim shoulder found at the rear of most shower heads.

* Faucet supply nuts.

* Works on that hard to grasp center wrench flat on a 3/8” compression coupling

* "Delta" style compression lavatory tubes.

* It will even tighten most stool bolts including the famous Hercules Johni-Bolt

“OneStop” wrench was built by a plumber with 35 years in the trade. He custom built the combination wrench seen here to save labor, protect delicate finishes and to MAKE IT EASIER! Try one today and you'll never go back!!

*PATENT PENDING

HOME