Downloaded from fsaerospace.tripod.com FS Aerospace Central v2 MS Flightsimulator (r) FS5.X and Flight Shop (tm) are needed to fly this plane! For the right fuel consumption a patched version of Flight Shop (tm) is needed ****************************************************************************** A‚rospatiale/ British Aerospace Concorde British Airways '75 livery designer: Marcel Ritzema FS6.0 flightmodel: Liomel McLaughlin & Marcel Ritzema ****************************************************************************** DATA: ----- type: long-range supersonic commericial transport powerplants: Four Rolls Royce/SNECMA Olympus 593 Mk602 turbojets, each 170kN crew: 3 passengers: normal 100, max 144 wing span: 25,56 m lenght: 61,66 m height: 12,50 m weights empty: 85.900 kg max fuel: 95.600 kg max payload: 12.700 kg max T.O: 185.070 kg max landing: 111.130 kg Vmo: 400 kts IAS below 32.000 ft max cruise speed: 1171 kts TAS (mach 2.04) @ 50.000-60.000 ft econ cruise speed: 1059 kts TAS (mach 2.02) @ 50.000-60.000 ft take-off speed: 200-215 kts approach speed: 190 kts landing speed: 155-165 kts range: 6228 km with 12.700 kg payload @ mach 2.02 6582 km with 8.845 kg payload @ mach 2.02 5110 km with 12.700 kg payload @ mach 0.95 FSFS FLIGHT-MODEL: ------------------ This current flight-model is the closest i came to the real performance of the Concorde. Don't expect real-life figures in the FDE. The main reason for this is the auto-pilot of FS can't handly planes heavier than approx 50 tons correctly. Then with this plane, the high speeds made it also more difficult. The takes-off speed is around 200 kts and the plane can be landed with autopilot with approach-speeds around 155-160 kts. (If the FSFS-adv GPWS is used don't forget to select "Cat D".) For more details how to operate this plane see the fly-con.txt file included in this zip-file. FILES: ------ xxx-con2.air FS5 air file fs6.zip zip file containing FS6 *.air & *.mdl file xxx-con2.?af texture files concorde.txt you're reading it fly-con.txt flying manual INSTALLATION FS5.1: ------------------- 1. Unzip these files to a temporary subdirectory and... 2. copy xxx-con2.air file to your \fltsim5\pilots directory 3. copy xxx-con2.*af texture-files to \fltsim5\texture directory INSTALLATION FS6.0: ------------------- 1. Unzip these files to a temporary subdirectory and... 2. copy xxx-con2.air & xxx-con2.mdl file to your \fltsim5\pilots directory 3. copy xxx-con2.*af texture-files to \fltsim5\texture directory Lastly i would like to thank Stefan 'doe' D”bereiner for his very good, and most of all, very usefull program "AFPAINT" V2.0. Have fun, Marcel Ritzema FsFAN-net : 81:100/650.13 E-mail : MGRitz@pi.net homepage : http://www.geocities.com/CapeCanaveral/Lab/8265/index.htm REMARKS: -------- 1. These files are for free use and enjoyment of all MSFS fans and can be distributed free of charge to any BBS or FTP provided all files that come with it are present in their original form and no money is made with it. 2. The files should not be altered and cannot be incorporated into other shareware or freeware programs or published on any electronic or mechanic media anywhere in the world without my written permission, except like stated at remark 1. THESE FILES ARE COPYRIGHTED. DISCLAIMER: ----------- There is NO warranty, guarantee of any kind and I am not liable for any problems on hardware or software you may encounter while using this file. You use this software at your own risk.