3.5" , ATA, Interface Hard Disk Drive
Installation Guide
Below is a diagram of the PCBA board for the M16XATU series of ATA Interface Disk Drive and also a summary of the user-selectable options including guidelines for the installation of the drive.
1. Drive Mounting requirements.
2. Jumper settings.
3. System parameters.
When installing this drive in any PC-AT computer, the system BIOS will need the following information to successfully read and write to the disk.
The formatted capacity of each drive can only be guarenteed if these
parameters are used.
| Model | Cyl | Hds | SCT | Wpcom | LZone | Capacity |
| M1612ATU | 1057 | 16 | 63 | 0 | 0 | 545 MB |
| M1614ATU | 2114 | 63 | 0 | 0 | 0 | 1091MB |
Page updated 98/07/14
