The BIO-Float-System is a newly development MODULE-Plant System for the anaerobic
treatment of industrial, farm-/agricultural and communal-waste-water with generation of
BIO-GAS.
Detail of Waste-Water-Treatment System.
 |
Palm Oil
|
|
Fruit and Food Processing
|
|
Distilleries, Breweries and Soft Drink processing.
|
|
Sugar, Tapioca Mills.
|
|
Paper Rubber Mills.
|
|
Animal Farming (Pig, Chicken and Etc)
|
|
Slaughter house, Skin Processing and Etc.
|
|
Aquaculture Industries (Prawn and Fish)
|
Future R&D with:
|
Veterinary Dept Malaysia
|
|
Fishery Dept Malaysia.
|
|
MARDI Malaysia
|
|
MARDEC Malaysia
|
|
PORIM / IGS Malaysia.
|
|
- The equipment should be designed as a MODULE-System which is to prefabricate in the
factory, easy to transport and install.
- The equipment should be lightweight and corrosion-proof, that the maintenance can be
reduce to a minimum like cleaning.
- The complete plant should float in a pond or basin, because in most of the concerned
factories an aerobic pond or basin is already available, so no additional land required.
- The equipment should be able to store BIO-GAS keeping the adjusted pressure nearly
constant over all the filling-range and so to adapt to an intermitted BIO-GAS-consumption.
- The complete plant should be adjustable to the waste-water-conditions even if the first
supplied unit is later to change in size or type of equipment, without investment-loss.
- It should be possible to provide first a "Test-Unit" for the Customer,
consisting of the smallest unit: A 6-MODULE-UNIT only. If the "Test-Unit" proves
the BIO-FLOAT-SYSTEM positive, the TEST-Unit will be expanded to the size of the required
plant, because it is fully to integrate in the plant. If the working on the Test-Unit is
not acceptable for the Customer the equipment will be removed and the site will be in the
same condition as at the time before it's installation except the piping and electric
cable to run the Test-Unit. With this the RISK for a potential Customer is reduced to
nearly ZERO.
Technology Advantage for all country:
| Modular Design |
| Product Out Of Composite Material (FRP) |
| Cost Saving for Industries |
| Future Export |
|
 ADVANTAGE OF THE BIO-FLOAT
SYSTEM
| FLOATING IN THE AEROBIC POND |
No Concrete-Structure |
| MODULE-SYSTEM |
| Prefabricated |
| Adjustable |
| Changeable |
| Removable |
|
| REACTOR-SYSTEM |
Self adjusting to different water level in pond |
| SUPPLY-SYSTEM |
| Separate supply modules (FRP) |
| Flow adjustable system separate each module |
| Cleaning without stop of the water-treating. |
| Portable-Pump on module. |
| Flow VIA gravity. |
|
| DISCHARGE-SYSTEM |
| Discharge directly into the pond |
| Submersible pimps located in the pump-sump |
|
| BIO-GAS SYSTEM |
Collected over the total reactor area and feed into gas channel |
| MATERIALS |
Fiber Glass Reinforced Polyester (RPF) |
|
I got it for free at http://come.to
