 |
 How to make a Bong |
|
| Due to popular request (We must of had about 500 people who wanted this page) this is our "How to make a bong page". This is a relatively simple process.
|
|
| #1 Get a long, small cylinder, a long tube (Such as the main part of a pen, preferally bic, with out the ink) |
|
| #2 Find a socket or some kind of "Bowl" (You can also use aluminum for this) |
|
| #3 Attach the bowl to one end of the pen (Remember it has to be connected airtight) |
|
| #4 Find a bottle (Preferably made of a strong plastic) |
|
| #5 Puncture a whole about 1/4 the way up the bottle |
|
| #6 stick the other end of the pen tube (Not the one with the bowl) into this whole, and make it air tight by using gum or a glue gun (Glue can melt, so be carefull when lighting that some weed up) |
|
| #7 Place a screen in the bowl (So as to not waste good hash) |
|
| #8 Puncure a hole 3/4 the way up the bong (This is your shotgun), make sure to place your finger on it when taking hits (Stupid) |
|
| #9 Fill the bong partially up with water |
|
| You're now ready to light it up |
|
| Here are the instructions for making a beer ball bong: |
|
| 2. 2, 3ft. of plastic tubing |
|
| 4. 3" of tubing (brass or metals r best but you can use part of the other plastic tubing, just dont let it get to hot!) take your emty beer ball and rise it out good! Then pierce a hole in the middle of the two holes that make up the ball pump inserts,this will be were you stick thee pippette or bowl connection. |
|
| Now cut a hole in the side of the ball nearest to the top, no bigger than a dime. The insert the tubing into the pump access hole at the top of the ball, this is were yyou will draw from the ball. fill the ball with water up to a desired height through one of these tubes, add your bwl and weed to the center hole that you cut and enjoy with friend! |
|
| about 1/4 full plastic Soda Bottle -one liters are the best |
|
| Pin, or earring if desperate |
|
| Ok, me and my friend were walking around our boring town,and we had NOTHING to make a bong...then i decided to buy a pepsi at 711. the fatass that she is (just kidding) she decided to get a crunch bar. Now we are dirty cigarette smokers, so i got this genius idea to burn holes in the bottle, and use the crunch bar wrapper as a bowl. I suggest folding tthe foil in half, so its stronger. I used my earring to poke holes in the foil for a screen. Now all u need to do is push the tinfoil inside of the opening of the bottle, its very easy. Stick the straw in one hole, use the other as a carb. Put some weed in the bowl, cover the carb with your finger, light it and inhale through the straw. And when you are done, the crunch bar comes in very handy since you will have munchies. Now the smoke doesnt exactly go through the water, but its an easier way to make a bong http://www.angelfire.com/nj/jeneannenenene |
|
| These instructions were sent in [email protected] E-mail him with questions or comments |
|
| |\/|<~~~ tin bowl \/= bowl- cant illustrate it too good sorry, but u know what i mean |
|
| carb>0 0 <~~~ put straw, this is where u inhale make it airtight |
|
| 1 Empty 2 Liter Bottle (plastic) |
|
| 1 Empty 1 Liter Bottle (plastic) |
|
| Scissors or Knife (preferably knife) |
|
| --------------------------------------------------- |
|
| Simply take the knife or scissors and cut the neck off of the 2-Liter so that the 1-liter will be able to fit inside it. Then cut the bottom part off the 1-liter. Tape the bottle caps together top to top. Poke a big hole in the caps and put foil in one of the sides. Poke small holes in the foil. Screw the cap onto the 1-liter (foil-side up)and place the one liter inside the 2-liter. Place herb of choice in the cap, fill the 2-liter with water while holding the 1-liter down and you ready to fire-up. Place flame in bowl and slowly pull the 1-liter upwards (do not go above the waterline or the smoke is lost). The 1-liter fills with smoke and a vacuum is created. Now unscrew the cap from the 1-liter and put your lips around the top then let go of the 1-liter. The smoke is shot into your lungs thus getting you higher faster. If you need something to put in the bowl contact me an I will show you good sites that feature smokeable. |
|
| -------------------------------------------------------------------------------- |
|
| This is a creatives arts version of your average bong. No initial parts list needed because half the fun is in finding the parts. This process could take a few hours but is well worth it. Of course everyone has seen those stupid little garden knomes that certain breeds of people put out in their yard. Well what most people don't realize is that these little crazy clay creatures are hollow! So drive around - preferably with a phat joint - and find yourself one of those curious little guys (or gals) and take it home. If you're lucky the mouth may all ready he open but one may need to drill a small hole in the mouth. Yes this is where you draw the smoke out - cool ehh? A second hole is needed right about the knome's ass. You may fabricate your own slide or buy one (I prefer to use just a strandard glass slide). The slide is glued into place in the little knomes ass. Let that puppy cool and fill it up with the right amount of water (through the mouth) and you have a pretty little partner to 'hook up' with. Enjoy. PS Don't be fooled when the slide burns out. That little bitch is still full of smoke you just can't see and is usually worth one or two more hits |
|
| -------------------------------------------------------------------------------- |
|
| take an apple. drill a hole where the stem in about halfway down the inside of the apple. Then dripp a hole on the side of the apple and make the hole connect to the hole that is already running down the middle of the apple. Then attack a hollow tube around the hole made on the side and jam it into the apple. put some bud where the stem goes, light and get high! the apple comes in handy for 2 reasons. 1, if your cheap and desperate to get high, you dont need a tube, jsut suck right out of the hole on the side and noone can tell your smokin up, it looks lie your jsut eating an apple. my cuzin and i did this in a laundry mat! it werked! reason 2 is the apple can be saved and eaten to get a small buz from the weed taste or it can be eaten right after getting high for the munchies. My cuzin did this with lots of apples and then made a bud apple pie of some sort. it was good! e-mail me if your interested. i got more ways too!!! |
|
| -------------------------------------------------------------------------------- |
|
| supplies honey bear (a plastic clear bear that honey comes in) clear plastic tubing |
|
| Take the (empty) honey bear and pull the cap off so that only the little pointy opening at the end is still there with the twist on top. Take a screw and push it through at and angle about 1/4 of the way to the bottom and with the aluminum bowl (with aluminum filter behind the bud) stick it into the hole (make sure its airtight with the gum). Fill the bear up with water(more than a 1/4 less than 1/2) stick the tubing on to the top of the bear where the hole is (make sure its airtight)and then poke another whole in the head of the bear for your carb. Thats how you make a honey bong! |
|
| -------------------------------------------------------------------------------- |
|
| Here are some profesional BONGS |
|
| Hey....Thats a BagPipe!!!! |
|
| I wonder...can I get high smoking from a BagPipe?!?!? |
|
|
|
