| Rules and Regulations |
| Hitches & Wheelie Bars |
 Hitches must be accessible from the
rear to make it easy to hook up to the sled. All hitches
must be located behind the rear axel of the machine, and
must be ridged. NO
MOVING HITCHES PERMITED.
Bolted or welded solid mount design. 5/8" maximum
thickness. NOTE:
HITCH EYELET MUST BE PARALLEL WITH THE GROUND.
Maximum hitch height from the top of the hitch to the
ground is 13" for all classes. Maximum hitch length
from the center of the rear axle to the end of the hitch
is 18". A 1-1/4" or larger hole is required for
the hook. |
| Wheelie bars are mandatory for all
classes. The only exception being a first time puller.
Wheelie bars must extend 5" to 6" behind the
tire to point of contact. Wheelie bars cannot extend a
maximum diameter of 6". Wheels cannot weight more
then 10 pounds each. This applies to tractors only. For
open classes, see rules under open classes. |
