| Syntax | Kommando |
|---|---|
a Adress [Opcode] | assemble |
c Area Ziel | compare |
d Range | disassembe |
| fill | |
g Adress | go |
| hunt | |
i Range | ascii dump |
j Range | screencode dump |
l "Filename" [,Device [,Loadadress]] | load |
lf "Filename" [,Device] | load fkeys |
ll "Filename" [,Device] | load labels |
m Range | memory ascii dump |
n Range | memory screencode dump |
| opcode hunt | |
p settings... | preferences |
r | show registers |
s "Filename" ,Device ,Range [,Loadadress] | save |
sf "Filename" [,Device] | save fKeys |
sl "Filename" [,Device] | save labels |
t Area Ziel | copy memory |
v "Filename" [,Device [,Loadadress]] | verify |
w Area Ziel | swap memory |
x [t] | exit/trace |
z [all | Adress [JumpType Action [Parameter] ]] | manage freezepoints |
�LabelName [= [Term]] | define/use/delete label |
? Term | show result of a term |
@ [#Device] [Command] | send DOS command / show status |
> Disass Output | edit disassembler output |
. Ascii Dump Output | edit ascii dump output |
, Screencode Dump Output | edit screencode dump output |
: Memory Ascii Dump Output | edit memory ascii dump output |
; Memory Screencode Dump Output | edit memory screencode dump output |
[ [Register] | show/edit first part of registers |
] [Register] | show/edit second part of registers |