You must agree to abide by the following rules and conditions to be eligible to borrow the tapes and books:

1. Only current paid up LAMA members are eligible.

2. If you damage or lose a tape you must pay the cost of replacement.

3. **The loan period is 1 month including mailing time both ways.**

4. The loan fee is usually $4.00 per video. Videos marked *** are $8.00 due to high acquisition cost

5. Mailing cost is $6.40 for priority mail. The package shipped to you will contain a pre-paid pre-addressed return mailer. This will allow you to mail the package back from any suitable mail box.

( Since the cost of mailing 1 or 2 tapes is the same, by renting 2 tapes, you get free shipping on the 2nd tape)

6. Don't send cash; Make check payable to LAMA LIBRARY FUND.

7. Video tapes may be checked out: at the LAMA meetings, my house, or by mail; no telephone

requests will be honored.

8. Only after you return the videos in good condition, or pay for replacement of damaged or lost tapes, will you be eligible to borrow again.

The currently available LAMA videos are:

V001 SAMUEL YELLINS'S LEGACY by Jack Andrews

V002 GREEN SAND CASTING TECHNIQUES by Gingrey & Bailey

V003 ADVANCED GREEN SAND CASTING TECH. by Bailey & Dilsaver

V004 THE COOPERS CRAFT by THE WILLIAMSBURG FOUNDATION

V005 THE COMPLETE METALSMITH by Tim McCreight

V006 BASIC BLACK SMITHING PART 1 by Herschel House

V007 BASIC BLACK SMITHING PART 2 by Herschel House

V008 BASIC BLACK SMITHING PART 3 by Herschel House

V009 KNITTING MAIL WITH CHAINED LYNX by Connie Gilbert

V010 FORGING DAMASCUS by Jim Hrisoulas (set of 2 tapes)

V011 BLACKSMITH'S JOURNAL VIDEO PART 1 by Jerry Hoffmann

V012 THE MAKING OF A KNIFE by Bill Moran

V013 DAMASCUS by Bill Moran

V014 BUILDING A KENTUCKY RIFLE PART 1 by Herschel House

V015 BUILDING A KENTUCKY RIFLE PART 2 by Herschel House

V016 BASIC ENGRAVING WITH LYNTON McKenzie Artisan Prod. LTD.\tab

V017 INT. ENGRAVING WITH LYNTON McKenzie Artisan Prod. LTD.

V018 ADVANCED ENGRAVING WITH LYNTON McKenzie Artisan Prod. LTD.

V019 TREADLE HAMMERING WITH CLAY SPENCER PART 1 by R C Forge

V020 TREADLE HAMMERING WITH CLAY SPENCER PART 2 by R C Forge

V021 ARCHITECTURAL IRON PART 1 WITH WALT SCADDEN by R C Forge

V022 ARCHITECTURAL IRON PART 2 WITH WALT SCADDEN by R C Forge

V023 THE ART OF SPUR MAKING VOL 1 by Bruce Cheaney

V024 MOKUME GANE FOR THE SMALL SHOP by Steve Midgett

V025 HANDLES GUARDS AND SHEATHS by Bill Moran

V026 PRECIOUS METAL CLAY by Tim McCreight

V027 GLASS BEAD MAKING by Lewis Wilson

V028 HOLSTERS by Dusty Johnson

V029 BASIC METAL LATHE OPERATIONS #1 by Chellis/Bailey

V030 BASIC METAL LATHE OPERATIONS #2 by Chellis/Bailey

V031 BASIC MILLING MACHINE OPERATIONS by Chellis/Bailey

V032 HAMMERING IN WILLIAMSBURG (JOHN ALLGOOD) by Williamsburg Foundation

V033 THE LOVELESS LEGEND by Bob Loveless

V034 KNIFE MAKING WITH COUSIN WILLIE by William White (new copy 2/00)

V035 INTRODUCTION TO FOLD FORMING by Charles Lewton/Brain

V036 FUNDAMENTALS OF FORGING #1 by Roy Bloom

V037 FUNDAMENTALS OF FORGING #2 by Roy Bloom

V038 CAST IRON WELDING by Kent White

V039 FIREPLACE EQUIPMENT #1 by Jeff Mohr

V040 FIREPLACE EQUIPMENT #2 by Jeff Mohr

V041 HOT PATINAS FOR BRONZE, BRASS & COPPER by Ron Young

V042 COLD PATINAS FOR BRONZE, BRASS & COPPER by Ron Young

V043 FINISHES FOR IRON by Ron Young

V044 INTRO TO FOLDING KNIVES by Jerry Fisk

V045 TAKE TIME & ENJOY FORGING by Jim Batson

V046 HAND FORGING & FINISHING KNIVES by Chuck Patrick

V047 LINER LOCKS & AUTOMATICS PT 1 by Mel Pardue

V048 LINER LOCKS & AUTOMATICS PT 2 by Mel Pardue

V049 BASIC BLACK SMITHING PT 1 by Rob Gunter ***

V050 BASIC BLACK SMITHING PT 2 by Rob Gunter ***

V051 FRANCIS WHITAKER WORKSHOP 93 by MFC

V054 D. HENDRICKSON & ROBERTA ELLIOT 95 by MFC

V055 BOB PATRICK 96 by MFC

V056 WENDELL BROUSSARD 97 by MFC

V057 BLACKSMITHS JOURNAL TECHNIQUES VOL II by Jerry Hoffman

V058 PETER ROSS LAMA BOB 4 1997 by Carl Zvonek

V059 THE BLACKSMITH (PETER ROSS) by Colonial Williamsburg

V060 OPERATING A SHAPER by Rudy Kohupt

V061 WORKING WITH TUBING by Covell

V062 THE ART OF MAKING FOLDING KNIVES by Cheaney

V063 HYDRAULIC PRESS FORGING OF KNIVES 98 ABANA by RCF

V064 ALUMINUM FORGING BY HAND & POWER HAMMER 98 ABANA by RCF

V065 MIKE BOON CONTEMPORARY FORGING 98 ABANA by RCF

V066 REPOUSSE& TOOLING A LEAF WENDELL BROUSSARD 98 ABANA by RCF

V067 DOOR LATCH HARDWARE ELMER ROUSH by RCF

V068 RASP ASP AND WELDED HINGE ELMER ROUSH by RCF

V069 BEGINNING KNIFE MAKING VOL I by Frank Garland

V070 BEGINNING KNIFE MAKING VOL II by Frank Garland

V071 (CABLE) HUNTING KNIFE by Wayne Goddard

V072 FORGING A SWORD- SCOTT LANKTON 98ABANA by RCF

V073 URI HOFI HAND FORGING WITH A STRIKER 98 ABANA by RCF

V074 URI HOFI HAND AND POWER FORGING (NIGHT DEMO) 98 ABANA by RCF

V075 ART JONES 300 POUND POWER HAMMER FORGING (NIGHT) 98 ABANA by RCF

V076 ART JONES 300 POUND POWER HAMMER FORGING (DAY) 98 ABANA by RCF

V077 BRAD SILBERG CONT.FORGE WORK / PRESS & POWER HAMMER 98 ABANA by RCF

V078 FRED CRIST CONTEMPORARY ARCHITECTURAL FORGE WORK 98 ABANA by RCF

V079 ALBERT PALEY FREE FORM POWER HAMMER FORGE WORK 98 ABANA by RCF

V080 TAL HARRIS TRADITIONAL ARCHETECTURAL IRONWORK 98 ABANA by RCF

V081 HOSS HALEY FORGED VESSELS 98 ABANA by RCF